Premium goat leather construction and quilted palm reinforcement give you long-lasting comfort, grip, and protection with that unmistakable old-school character.

Perforated leather zones, pre-curved fingers, and stretch panels across the knuckles offer great breathability and an easy fit – right out of the box.

TPR-backed knuckle protectors and EVA foam inserts on the palm provide slide and impact protection, making them as functional as they are timeless.

Material

Crafted from premium full-grain goat leather, the Fuel glove delivers a durable, supple feel that improves with age. Perforated panels on the palm and back enhance breathability for warm urban rides. A quilted leather overlay on the palm adds grip, character, and abrasion resistance – without compromising on retro styling.

Protection

Designed for city use, the Fuel features leather-covered TPR knuckle protectors with EVA foam backing for everyday impact absorption. The reinforced palm panel with EVA padding offers basic slide protection for low-speed spills. It’s the perfect blend of heritage aesthetics and functional safety for urban riders.

Comfort and Fit

Pre-curved fingers and stretch panels across the knuckles give the Fuel a naturally broken-in fit. Touchscreen tips on the index and thumb make it easy to use your phone on the go. Lightweight and flexible, it stays comfortable through long commutes without losing its old-school charm.

How to Measure Glove Size

Step 1 – Measure Your Hand
Grab a tailor’s measuring tape and take two quick measurements:
Circumference – Wrap the tape around the widest part of your palm. Lightly close your hand before noting the number.
Length – Measure from the tip of your middle finger to the base of your palm (where your wrist starts).

Step 2 – Check the Size Chart
Match your measurements with the size chart to find the right fit.
If your length and circumference fall in different size categories, go with the larger one.
If you’re in between sizes, try both and pick the one that feels better on the bike.
A good fit means better control, less fatigue, and max protection—don’t guess it.

How to Check Glove Fitment

STEP 1 – Confirm that the gloves are a comfortable fit.
They should not be excessively tight on all fingers (including the thumb) & knuckles.
To check this, try the gloves on and form a fist several times and verify if:
1. Adequate room for all fingers (specially thumb) to move and operate controls comfortably.
2. Check the fitment on both hands since your left and right hand sizes do vary.
Ensure that the fit on first try is not so tight as to cause discomfort and/or restrict movement

STEP 2 – Ensure the knuckle protectors are properly positioned.
The way to check this is:
1. Roll your hand into a tight fist and hold the position for 5-10 minutes. This position should be easy to hold without causing any discomfort or causing any stress points.
2. Ensure that the edge of the knuckle protector is not over the knuckle when the fist is formed.”

Care and Storage

Cleaning Your Gloves
What you’ll need:
Microfiber cloth, soft-bristled brush, absorbent towel, pH-neutral leather cleaner, leather conditioner, lukewarm water

Steps:
Mix a bit of leather cleaner with lukewarm water.
Dip the microfiber cloth, wring it slightly, and gently wipe the gloves clean.
Mud splatters? Let them dry first, then brush them off before wiping.
Work from wrist to fingertips, getting between each finger.
Rinse your cloth often so you’re not rubbing dirt back in.
Flip and repeat on the other side.

Important:
No hot water.
No harsh cleaners, fuel, fabric softener, or scrubbing.
No machines or pressure washers.
Don’t wring them.

Drying Wet Gloves
Gently press with an absorbent towel—do this even if it’s just rainwater.
Let them dry naturally, indoors, away from sunlight and heat.

CE Level 2 Sas-Tec knuckle armour, SuperFabric palm reinforcement, and EVA inserts keep you covered through trail spills and slides.

Pre-curved fingers, stretch fabric panels, and fingertip overlays mean no break-in needed – just grip and go.

Built using 4-way stretch textile and perforated Kaitai microfiber suede for unbeatable breathability, grip, and all-day comfort.

Material

Made using a breathable 4-way stretch textile on the back and perforated Kaitai microfiber suede on the palm, the Roost v2 is built for maximum flexibility and control. SuperFabric panels with EVA foam reinforce high-risk zones, while silicone prints on key fingers improve grip. The touchscreen tips on both index fingers let you access your phone without taking the gloves off.

Protection

These gloves are made to handle the unpredictable nature of off-road rides. You get CE Level 2-rated Sas-Tec knuckle armour, abrasion-resistant SuperFabric at the scaphoid, and EVA padding layered for impact protection. An extra panel along the pinky side helps reduce injury during slides, while reinforced fingers keep you covered on rough terrain.

Comfort and Fit

The Roost v2 is all about easy movement and day-long wearability. Pre-curved fingers follow your hand’s natural position, while the stretch fabric flexes with every gear shift or brake pull. Finger overlays eliminate seam pressure, and a pull tab at the cuff helps you slide them on with no fuss – even after a long trail ride.

How to Measure Glove Size

Step 1 – Measure Your Hand
Grab a tailor’s measuring tape and take two quick measurements:
Circumference – Wrap the tape around the widest part of your palm. Lightly close your hand before noting the number.
Length – Measure from the tip of your middle finger to the base of your palm (where your wrist starts).

Step 2 – Check the Size Chart
Match your measurements with the size chart to find the right fit.
If your length and circumference fall in different size categories, go with the larger one.
If you’re in between sizes, try both and pick the one that feels better on the bike.
A good fit means better control, less fatigue, and max protection—don’t guess it.

How to Check Glove Fitment

STEP 1 – Confirm that the gloves are a comfortable fit.
They should not be excessively tight on all fingers (including the thumb) & knuckles.
To check this, try the gloves on and form a fist several times and verify if:
1. Adequate room for all fingers (specially thumb) to move and operate controls comfortably.
2. Check the fitment on both hands since your left and right hand sizes do vary.
Ensure that the fit on first try is not so tight as to cause discomfort and/or restrict movement

STEP 2 – Ensure the knuckle protectors are properly positioned.
The way to check this is:
1. Roll your hand into a tight fist and hold the position for 5-10 minutes. This position should be easy to hold without causing any discomfort or causing any stress points.
2. Ensure that the edge of the knuckle protector is not over the knuckle when the fist is formed.”

Care and Storage

Cleaning Your Gloves
What you’ll need:
Microfiber/ soft cloth, Small bowl or mixing cup, Absorbent towels, Soft-bristled brush, Diluted cleaning solution, Lukewarm water

How to clean & dry gloves?
1. Clean the gloves as soon as you are able to, after your off-road session. This will make removing any stains easier. Leaving the gloves un-clean will make removing any stains tougher.
2. In a small bowl or measuring cup, mix a portion of diluted cleaning solution in lukewarm water.
3. Dampen a microfiber cloth with the mixture and gently wipe the stained areas. If there are stains which you are unable to remove using a damp cloth, use a soft bristled brush soaked in a mild pH neutral soap and rinse off using cold water. Please note that using a stiffer brush could lead to piling which will not be covered under warranty.
4. Clean the gloves starting at the wrist and working toward each fingertip. Be sure to clean well between each finger. Keep moving to a clean area of the cloth as the dirt is transferred.
5. Rinse the cloth often as the dirt is transferred. Turn the gloves over and repeat on the other side.
6. DO NOT USE HOT WATER
7. Do not use detergents, fabric stain removers, bleach or any chemicals for cleaning.
8. Do not wash the gloves in a washing machine.
9. Dip dry the gloves after cleaning in a ventilated area away from direct sunlight.
10. Do not wring the gloves.

How to store?
When gloves are stored wet or in a non-ventilated area, this may cause deformations and ruin your gloves, not to mention this allows mildew to grow causing discoloration and damage.
1. Make sure that your gloves are completely dry before you store them.
2. Place them in a breathable cotton bag to protect them from dust but with enough air circulation to prevent mildew from forming.
3. Store them in a cool, dry, well ventilated area

CE Level 2 knuckle armour, Knox SPS 303 palm sliders, and carbon wrist sliders offer top-tier impact and slide protection – built for both street and touring use

Floating knuckles, dual-size protectors, and stretch accordions on fingers ensure zero restriction and all-day ease, even in traffic.

Full-grain goatskin leather with 3D mesh panels balances abrasion resistance with ventilation – tested to exceed CE Level 2 standards.

Material

Made using durable full-grain goatskin leather on the palm and heavy-duty 3D air mesh on the back, the Holeshot Pro keeps things light, breathable, and resilient. The leather offers natural water resistance and excellent abrasion protection, while the mesh construction ensures maximum airflow in hot Indian conditions. A SuperGrip silicone patch in the palm improves lever control, especially in sweaty or wet environments.

Protection

Engineered to exceed CE Level 2 benchmarks where it matters most, the Holeshot Pro features hard knuckle armour in dual sizes for a better fit, carbon wrist sliders for ulna protection, and the low-profile Knox SPS 303 sliders on the palm to prevent scaphoid injuries. TPR finger inserts with memory foam backing provide added impact protection, while a dual closure system keeps the gloves securely in place during a crash.

Comfort and Fit

Stretch fabrics and accordion panels across the fingers allow for natural movement and all-day comfort. Memory foam beneath the protectors reduces pressure points on longer rides. The pre-curved design and floating knuckles ensure zero resistance at the levers, while touchscreen-compatible tips and a soft visor wipe make it perfect for everyday utility on the road.

How to Measure Glove Size

Step 1 – Measure Your Hand
Grab a tailor’s measuring tape and take two quick measurements:
Circumference – Wrap the tape around the widest part of your palm. Lightly close your hand before noting the number.
Length – Measure from the tip of your middle finger to the base of your palm (where your wrist starts).

Step 2 – Check the Size Chart
Match your measurements with the size chart to find the right fit.
If your length and circumference fall in different size categories, go with the larger one.
If you’re in between sizes, try both and pick the one that feels better on the bike.
A good fit means better control, less fatigue, and max protection—don’t guess it.

How to Check Glove Fitment

STEP 1 – Confirm that the gloves are a comfortable fit.
They should not be excessively tight on all fingers (including the thumb) & knuckles.
To check this, try the gloves on and form a fist several times and verify if:
1. Adequate room for all fingers (specially thumb) to move and operate controls comfortably.
2. Check the fitment on both hands since your left and right hand sizes do vary.
Ensure that the fit on first try is not so tight as to cause discomfort and/or restrict movement

STEP 2 – Ensure the knuckle protectors are properly positioned.
The way to check this is:
1. Roll your hand into a tight fist and hold the position for 5-10 minutes. This position should be easy to hold without causing any discomfort or causing any stress points.
2. Ensure that the edge of the knuckle protector is not over the knuckle when the fist is formed.”

Care and Storage

Cleaning Your Gloves
What you’ll need:
Microfiber cloth, soft-bristled brush, absorbent towel, pH-neutral leather cleaner, leather conditioner, lukewarm water

Steps:
Mix a bit of leather cleaner with lukewarm water.
Dip the microfiber cloth, wring it slightly, and gently wipe the gloves clean.
Mud splatters? Let them dry first, then brush them off before wiping.
Work from wrist to fingertips, getting between each finger.
Rinse your cloth often so you’re not rubbing dirt back in.
Flip and repeat on the other side.

Important:
No hot water.
No harsh cleaners, fuel, fabric softener, or scrubbing.
No machines or pressure washers.
Don’t wring them.

Drying Wet Gloves
Gently press with an absorbent towel—do this even if it’s just rainwater.
Let them dry naturally, indoors, away from sunlight and heat.
Never use a dryer, radiator, or direct sunlight.
While drying, wear them occasionally to keep the shape.

Conditioning the Leather
Once dry, condition them. This keeps the leather flexible, breathable, and crack-free.
Use a good leather conditioner – nothing that clogs the pores.
Rub it in evenly and let it soak.
Wipe off any extra

Storing Your Gloves
Only store when completely dry.
Use a breathable cotton bag – skip plastic.
Keep them in a cool, ventilated place.
Take care of them, and they’ll take care of you on every ride.

Hard knuckle protection, palm sliders, and TPR finger inserts absorb the shock of everyday street spills and slow-speed slides.

Pre-curved fit, flexible mesh panels, and reinforced control fingers offer easy movement and long-lasting comfort – right from the first ride.

Breathable stretch textile and micro-suede construction keeps things cool and grippy, making Miller ideal for Indian city conditions.

CE Level 2 carbon fiber knuckle armour, Knox SPS 404 palm sliders, and TPU inserts take the brunt of every hit – on track or highway.

Pre-curved fit, floating knuckles, and accordion stretch panels mean zero resistance and all-day ease

Full-grain goatskin leather resists abrasion without compromising feel – Intertek-certified to meet CE Level 1 benchmark while outperforming CE Level 2 standards on some parameters