Ultra-breathable mesh zones and moisture-wicking fabric keep you cool and dry, even in peak summer heat.

4-way stretch panels offer all-day comfort with zero restriction.

Flatlock seams prevent chafing and a relaxed fit allows for use with or without body armour.

Material

Made using ultra-breathable mesh zones and moisture-wicking fabric, the Dirt Jersey is purpose-built for Indian off-road conditions. It actively pulls sweat away from the body and allows high airflow through sweat-prone zones, keeping you cool and dry no matter how hard you’re pushing.

Mobility

With 4-way stretch panels integrated throughout, the jersey moves with you, even if you’re standing on the pegs, shifting your weight mid-corner, or tackling uneven terrain. It offers full range of motion without resistance or bulk.

Comfort & Fit

Flatlock seams eliminate chafing and hotspots, while the streamlined profile prevents bunching and discomfort during high-movement rides. A relaxed fit allows for the jersey to be used with or without body armour.

Wash, care and storage

1. Gently rinse with cold water after each ride to remove dust, dirt, and sweat buildup.
2. Use mild detergent in cold water. No bleach, softeners, or hot water, they’ll ruin the fabric and print.
3. Air dry inside out, in the shade.
4. Don’t wring, iron, tumble dry, or leave it under direct sun.
5. Store flat in a cool, dry place.

Pre-shaped ergonomic design offers seamless layering comfort under your riding jacket without restricting movement.

Triple-layer construction with a thermal fleece core traps body heat while blocking wind for optimal winter warmth.

Elasticated cuffs, close-fit collar, and adjustable hem provide a snug, stay-in-place fit without bulk.

Material

Built with a triple-layer softshell fabric and a brushed fleece inner lining, the Boreal offers exceptional warmth without excess bulk. The exterior resists wind and light rain, while the soft inner layer traps heat effectively. High-stretch panels at the sides and underarms improve mobility and layering comfort during long hours on the road.

Warmth and Insulation

The Boreal is designed for winter rides and high-altitude terrain. Its thermal fleece core provides consistent insulation across the torso and arms, helping retain body heat without overheating. Elasticated cuffs and a contoured collar seal out cold air, keeping you warm during early-morning starts or wind-chilled descents.

Comfort & Fit

The pre-curved FocusFit silhouette ensures a body-hugging fit that works seamlessly under an outer shell. Articulated sleeves and stretch panels at high-movement zones allow unrestricted motion, while the drop-tail design keeps your lower back covered when leaned forward in a riding position. Adjustable hem toggles give you control over fit and retention.

Things to remember

1. The Boreal is designed as a snug midlayer – meant to sit close to the body for optimal insulation and easy layering under an outer jacket. It shouldn’t feel bulky or loose.
2. Wear it on a few rides to let the fabric adapt to your posture. Use the hem toggles and zipper fully closed for best heat retention.
3. Store it flat or hang it in a ventilated space.
4. Avoid compressing for long periods to maintain the loft and performance of the thermal fleece lining.

Care and storage

1. Wipe clean with a damp cloth and lukewarm water – do not use hot water.
2. Avoid contact with solvents, fuel, fabric softeners, or alcohol-based cleaning agents.
3. Always dry on a hanger in a ventilated area, away from direct sunlight or heat sources.
4. Ensure the midlayer is completely dry before storing to prevent mildew or fabric damage.
5. Clean and lubricate zippers regularly using vaseline or candle wax.

Purpose-built for hot-weather riding with CrossFlowTech mesh zones and Cordura impact panels for the perfect balance of airflow and protection.

FocusFit tailoring ensures a no-flap silhouette with unrestricted movement, if you’re commuting or crossing state lines.

Equipped with CE Level 2 Power Tector armour at shoulders, elbows, back and chest plus reinforced abrasion zones for serious crash protection.

How to measure size for riding jackets?

Things to keep in mind to ensure the measurements are taken correctly

• It will be helpful to have a family member or a friend take the measurements
• Please use flexible tape only, like a tailor’s tape
• All the measurements must be in the same units, whether cm or inches
• You should preferably be wearing base layers while taking measurements, and avoid anything bulky

STEP 1 – Measure using a tailor’s tape
There are two key measurements that you need to take into consideration for figuring out your jacket size.
A) Chest – Wrap the tape measure around the widest part of the chest and do not inhale while taking the measurement. Tape measure over your chest should be comfortable i.e. not too tight or loose. Keep your arms loose on the sides, and breathe in normally.
B) Waist – Measure the circumference of your waist over the belly button. Keep the tape parallel to the ground, not too loose or too tight.

STEP 2 – Find your jacket size by checking measurements against the size chart provided

• If both the measurements do not fall in one particular size – use the larger of the two measures to choose the jacket size.
• If the two measurements are on the border line between two sizes, choose the one that offers a preferred fit i.e. sporty fit (lower size) or comfort fit (higher size) depending on your preference.

Remember, each brand has its own body size charts, so do check the chart before you select the size.
Please watch the video explaining these steps and reach out to us if you need help!

Materials

Crafted from abrasion-resistant Cordura 500D, the Kruger Air is purpose-built for high-mileage touring. Reinforced panels at impact zones improve tear resistance, while heavy-duty mesh construction allows for all-day breathability. Premium fittings, bar-tacked seams, and durable adjusters ensure the jacket holds up ride after ride. Original YKK zippers & pullers for extra durability and smooth operation of zips with best in class coverage with 180 jacket-pant connector

Visibility

Discreet yet effective reflectives are placed across the arms, chest, and back to light you up under headlamps – without breaking the jacket’s clean, low-key aesthetic. Visibility when you need it, subtle style when you don’t.

Things to Remember

The Kruger Air comes with PowerTector CE Level 2 certified protectors for Back, Shoulder, Elbows AND CHEST.

• Even the best of protective armour is of no use if it is not in the right place. The Kruger Air jacket comes with multiple adjustments to help get the armour position right for you!
• Smartly placed stretch panels at the back and elbows allow for ease of movement and ensure a snug fit to the body.
• The Kruger Air is a well-ventilated riding jacket making it perfect for the hot and humid Indian conditions. We achieved this by using a combination of a special blend of mesh and fabric in the construction of the jacket, as well as by using ventilated Powertector CE Level 2 protectors.
• We even made sure that the inner lining of our jacket pockets are made of mesh so that it does not inhibit the flow of air when you’re on the move.
• The inner lining of the jacket is also treated to enhance moisture wicking which helps cool you down during long days in the saddle.

Wash and Care

MPORTANT NOTE:
Body armours/ protectors must always be removed before starting the washing process

CLEAN & CARE:

• For dirt and stains, clean with a soft-bristled brush and lukewarm water (DO NOT USE HOT WATER)
• DO NOT allow your jacket to come in contact with solvents (do not use fabric softener!), fuel, or cleaning agents.
• DO NOT use any kind of CHEMICAL or ALCOHOL-BASED product. For longer life of the fabric, we recommend hand washing the jacket using mild detergent
• Do not place your jacket near, or come in contact with a direct heat source
• Dry the jacket on a hanger away from direct sunlight where there is good ventilation.
• Zippers need to be cleaned and lubricated regularly – you can use vaseline or candle wax

STORAGE:

• Make sure your jacket is completely dry with armours removed before you store it on a hanger.
• If stored wet or in a non-ventilated area as it allows mildew to grow on the fabric causing discoloration and damage
• Do not store the jacket in air-tight plastic bags

Ventilation

DESIGNED FOR INDIAN CONDITIONS

• CrossFlowTech – With large mesh panels across the chest, back, and sleeves, the Kruger Air ensures airflow exactly where you need it.
• Temperature Tested – Armours work across a wide temperature range from -20 C to 40 C with no performance loss
• Armour design with AVS – Even the Power Tector armour comes with perforations to encourage ventilation in high-impact areas, so you stay cool without compromising safety.

Comfort & Fit

DESIGNED FOR RIDING POSITION

• Designed for the touring stance, the Kruger uses our FocusFit system to keep all armour snug and properly aligned.
• Articulated sleeves, flexible panels, and fine-tune adjusters at the arms, waist, and hips help reduce pressure points and eliminate fatigue during long hours on the road.

Protection

DESIGNED FOR COMPLETE PROTECTION

• CE LEVEL 2 PROTECTORS – Equipped with CE Level 2 Power Tector armour on the shoulders, elbows, back and chest, the Kruger Air offers serious protection without restricting movement.
• Proper protector placement – Shoulder, elbow and back protectors positioned as per Indian body measurements. Chest protectors positioned closer to the sternum for improved safety.
• Wider coverage – Larger Type B protectors for shoulder & elbow, and full back armour offer wider coverage.
• Dual-layer Cordura reinforcements in key slide zones boost abrasion resistance.
• Add an optional chest protector and connect to your riding pants with the built-in 180-degree pant connector for full-body coverage.

How to check fitment for riding jackets?

How to check if the armour is in the right position and how to make adjustments to ensure the armours stay in place?

If you are trying it on at the store, wear it for 5-10 min to get comfortable in it. Keep in mind that the Kruger Air is designed to work best in the riding posture with the arms forward. So other movements could feel restrictive.

STEP 1 – Confirm that the armours are in the correct position The jacket fit should be such that the armours are in the anatomically correct position. Since we are all unique, this could mean that the elbow armour might be slightly off in some cases depending on length of your arms.

STEP 2 – Ensure the armours are properly positioned.

• In case the jacket fit is correct but the elbow armour is slightly off, use the cinching mechanism to adjust the elbow armour and bring it closer to your body.
• To do so, first make sure the ladderlock is not on the same line as the webbing.
• Pull the ladderlock slightly away from the body, and simply pull it away from the loop to tighten or towards the loop to loosen.
• You also have cinch straps on the hips for adjustment.

Warm, breathable fleece traps heat without trapping sweat – perfect for cold weather rides.

Special knitted fleece fabric offers 4 way stretch and provides extra comfort under riding jacket.

Flat-lock seams and soft piping reduce chafing and pressure points for long hours in the saddle.

Material & Construction

Crafted from soft, mid-weight fleece with 4-way stretch, the B100 Fleece top is made for cold rides where warmth and flexibility matter. The breathable fabric wicks away moisture and dries quickly, while flatlock seams and soft piping ensure lasting comfort under the riding jacket.

Insulation and Breathability

Fleece traps body heat without locking in sweat, keeping you warm while allowing excess moisture to escape. Perfect for winter mornings, mountain passes, or long hours in low temperatures.

Things to remember

1. The B100 Fleece top is designed for a snug fit that layers cleanly under riding pants without shifting or bunching.
2. For best performance, wear it directly over skin or thin base underwear – bulky layers underneath can limit stretch and reduce moisture-wicking.
3. Always air it out/ clean it after each ride to prevent sweat buildup and odour.
4. Fold flat and avoid stuffing into tight spaces to maintain the fabric’s stretch and long-term comfort

Wash, care and storage

1. Wash separately in cold water before first use.
2. Always turn the base layer inside out before washing to protect the outer fabric and stitching.
3. Hand wash with mild, pH-neutral detergent. Avoid bleach, fabric softeners, or stain removers.
4. Do not wring. Gently drip dry in a ventilated, shaded area – keep away from direct sunlight or heat.
5. Do not tumble dry, dry clean, or iron.
6. Store flat or folded in a cool, dry place. Avoid prolonged exposure to sun or heat sources.
7. Do not alter the garment or get it repaired outside authorised channels – this voids the warranty.

Designed to layer easily over riding gear with pre-curved arms and a roomy, ergonomic fit.

Dual-tone laminated ripstop outershell rated for 5000mm water column pressure offers durable waterproof performance.

YKK Aquaguard zipper with overflap and rain gutter ensures secure closure and minimises water ingress.

Material

Made from PU-laminated ripstop polyester, the M200 balances lightweight comfort with dependable waterproofing. The shell is rated for 5000mm water column pressure and built to handle tough weather conditions.

Construction & Durability

The outer shell forms a full waterproof barrier, reinforced with a zipper rain gutter and external overflap to keep water out. Wider cuffs with Velcro adjusters ensure compatibility with gloves and prevent water ingress at the wrists.Bar-tacked reinforcements and high-quality stitching hold up through repeated wear.

Comfort & Fit

Pre-curved sleeves and a roomy fit are designed to layer over riding jackets without restricting movement. The removable hood and ergonomic cut offer flexible protection, whether you’re on the bike or off it. A rear exhaust vent helps body heat escape, reducing sweat buildup in humid riding conditions.

Things to remember

1. Smooth out zipper flaps to prevent water from pooling and seeping through during continuous rain.
2. Avoid wearing the jacket over a large backpack, as it can stress the seams and fabric.
3. Condensation may occur inside due to temperature differences – this is normal and not a leak.
4. Tuck the collar or wear the hood under the helmet to reduce water entry at the neck.

Care and storage

1. Wipe clean with a damp cloth and lukewarm water – do not use hot water.
2. Avoid contact with solvents, fuel, fabric softeners, or alcohol-based cleaning agents.
3. Always dry on a hanger in a ventilated area, away from direct sunlight or heat sources.
4. Ensure the jacket is completely dry before storing to prevent mildew or fabric damage.
5. Clean and lubricate zippers regularly using vaseline or candle wax.

Vintage design cues meet purposeful features, making it ideal for both saddle time and streetwear.

Pre-curved sleeves and breathable zones on the torso sides keep you cool and ride-ready.

Heavy-duty cotton canvas outer shell with natural leather reinforcements offers abrasion protection where it counts.

How to measure size for riding jackets?

Things to keep in mind to ensure the measurements are taken correctly

• It will be helpful to have a family member or a friend take the measurements
• Please use flexible tape only, like a tailor’s tape
• All the measurements must be in the same units, whether cm or inches
• You should preferably be wearing base layers while taking measurements, and avoid anything bulky

STEP 1 – Measure using a tailor’s tape
There are two key measurements that you need to take into consideration for figuring out your jacket size.
A) Chest – Wrap the tape measure around the widest part of the chest and do not inhale while taking the measurement. Tape measure over your chest should be comfortable i.e. not too tight or loose. Keep your arms loose on the sides, and breathe in normally.
B) Waist – Measure the circumference of your waist over the belly button. Keep the tape parallel to the ground, not too loose or too tight.

STEP 2 – Find your jacket size by checking measurements against the size chart provided

• If both the measurements do not fall in one particular size – use the larger of the two measures to choose the jacket size.
• If the two measurements are on the border line between two sizes, choose the one that offers a preferred fit i.e. sporty fit (lower size) or comfort fit (higher size) depending on your preference.

Remember, each brand has its own body size charts, so do check the chart before you select the size.
Please watch the video explaining these steps and reach out to us if you need help!

Materials

Crafted from heavy-duty 100% cotton canvas with warp-knit mesh panels, the Wayne balances durability with breathability. Leather reinforcements at the elbows offer extra abrasion resistance in case of a slide. YKK zippers throughout ensure smooth operation and long-term reliability, while subtle branding and premium trims elevate the overall finish.

Protection

The Wayne is armour-ready and compatible with CE Level 2 Sas-Tec or PowerTector armour used in the Spencer, Miller, or Fender jackets. Leather at the impact zones adds natural abrasion resistance and help reduce the risk of road rash in case of a fall.

Comfort & Fit

Designed for the riding posture, the Wayne features pre-curved sleeves and an ergonomic cut that reduces bunching up front. It moves with your body – not against it. Even without armour, the structure offers enough support for casual, unarmoured rides around the city.

Ventilation

Mesh panels along the sides of the torso offer airflow – under the arms and around the core. The Wayne keeps it functional and breezy without compromising the classic silhouette.

Visibility

Low-profile reflective elements are subtly integrated into the design to ensure visibility in low-light conditions without clashing with the retro aesthetic. Stay seen without looking flashy.

Wash and Care

IMPORTANT NOTE:
Body armours/ protectors (if any) must always be removed before starting the washing process

CLEAN & CARE:

• For dirt and stains, clean with a soft-bristled brush and lukewarm water (DO NOT USE HOT WATER)
• DO NOT allow your jacket to come in contact with solvents (do not use fabric softener!), fuel, or cleaning agents.
• DO NOT use any kind of CHEMICAL or ALCOHOL-BASED product. For longer life of the fabric, we recommend hand washing the jacket using mild detergent
• Do not place your jacket near, or come in contact with a direct heat source
• Dry the jacket on a hanger away from direct sunlight where there is good ventilation.
• Zippers need to be cleaned and lubricated regularly – you can use vaseline or candle wax
• Leather needs to be conditioned after every wash cycle to replenish the natural oils within.

STORAGE:

• Make sure your jacket is completely dry with armours removed before you store it on a hanger.
• If stored wet or in a non-ventilated area as it allows mildew to grow on the fabric causing discoloration and damage
• Do not store the jacket in air-tight plastic bags